GNATUS EasySonic, Owner'S Manual

Page: 43 / 76

PRECAUTIONS, RESTRICTIONS AND WARNINGS
Recommendations for the dental equipment maintenance
Your Gnatus equipment has been designed and developed according to the standards of
modern techology. Similarly to other kinds of equipment, it requires special care, which is
many times neglected due to several reasons and circunstances. Therefore, here are some
important reminders for your daily routine. Try to follow these simple rules, which will save
you a lot of time and will avoid unnecessary expenses once they start making part of your
working procedure.
43
- The equipment has been designed not to be sensible to interferences as magnetic
fields, external electrical influences, electrostatic discharges, the pressure or the variation
of pressure, since the equipment is installed and kept clean, conserved, transported and
operated conforming this operation instruction.
Sensitivity to predictable environmental conditions in ordinary
situations of use
The equipment must be transported and stored with the following observations:
- Carefully, to not suffer falls and neither receive impacts.
- Protected from moist, do not expose to rain, water splashes or moist floor.
- Keep in a protected place from the rain and direct sun and its original package.
- When transporting, do not move it in irregular surfaces and protect the package from
the direct rain and respect the maximum piling informed at the external part of the package.
- Room temperature range for transport or warehousing -12ºC to +50ºC.
- Room temperature range recommended by 10ºC to +35ºC.
Transport conditions, warehousing and operation
The equipment keeps its safety condition and efficiency, since kept (stored) as
mentioned in this operation instruction. That way, the equipment will not lose or
change its physical and dimensional characteristics.
- The equipment should only be installed by Gnatus authorized technical assistance or
technicians.
- Position the equipment in a place where it will not get wet.
- Install the equipment in a place where it will not be damaged by pressure, temperature,
humidity, direct sunlight, dust, salts, or sulfur compounds.
- The equipment should not be submitted to inclination, excessive vibrations, or blows
(including during transportation and handling).
- This equipment was not planned for use in an environment where vapors, anesthetic
mixtures infl ammable with air, or oxygen and nitrous oxide can be detected.
- Before the first use and/or after long interruptions from work such as vacations, clean
and disinfect the equipment; eliminate air and water deposited in the internal hoses.
Precautions and warnings “during the installation” of quipment