HOW TO LAMINATE
2nd step : Preparation for lamination
Warning :
When preparing the lamination, Please pay attention to not touch the laminating roller. It would cause a burn.
2. Pass the upper and lower film through the guide roller and attach the
film to the loading paper using a tape.
※ If the film does not pass the guide roller, it would cause wrinkles.
※ It would be helpful if you preheat the roller before doing this step
1. Insert the loading paper between the upper/lower roller
when the machine is stopped.
※ The paper length must be long enough pass the decurling
bar and deculing guide roller and should adequately
contact the Pull roller.
1
2
3.
Close the upper cover, and press the run button and attach the
paper when it comes out.
3
4
4.
You can set the speed and temperature using Control panel.
16/25
