background image

PA G E   2 0  

i n s t r u c t i o n   m A n uA l  

G • F i s H – G 1 4 2 F D

the G142FD can be connected to external devices with 
nmEA0183 and display information such as: 

•   Dsc VHF radio
•    GPs antenna (nmEA 0183)
•    navtex
•    Ais receiver

Dsc VHF radio

Fit and set up the optional Dsc VHF radio see following 
drawings, nmEA0183(1) in and nmEA0183(2) in.

other NmEa instruments

nmEA is an industry standard for interconnecting instruments. 
the fishfinder can be connected to other nmEA instruments.  
set up the optional nmEA instruments see drawings below. 

•    the fishfinder can receive and display depth, paddlewheel 

boat speed and water temperature from an optional 
compatible instrument. 

•    the fishfinder can receive data from an optional compatible 

GPs or GPs/DGPs source. 

•   the fishfinder can send GPs position and other navigation 

data to an autopilot or other instrument. An autopilot 
requires APB, APA and VtG sentences

A data to other instruments, set nmEA out and specify the 
nmEA data to send. 

output (1) NmEa 0183

Input (1) NmEa 0183

the nmEA2000 standard is regulated by the national 
marine Electronics Association in usA. the fishfinder can be 
connected to external devices with nmEA2000 and display 
information such as following: 

•   Engines have fuel flow sensors, therefore fuel sensors are 

not required.  

•   the G142FD can receive and display wind speed and 

direction from an optional compatible wind instrument. 

•   the G142FD can receive and display depth from an 

optional depth instruments. 

•   the G142FD can receive and display boat speed and water 

temperature from a paddlewheel sensor on a optional 
speed instrument. if connected display unit, use the cable 
compatible with nmEA2000 standard.

Input (1) NmEa 0183

output (1) NmEa 0183

5-6 NMEA 0183

5-7 NMEA 2000

NmEa 2000

Summary of Contents for G-Fish G142FD

























Reviews: