GMC YUKON 2018 Owner'S Manual Download | Manualshive

Page: 71 / 425

background image

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-11349262) - 2018 - crc - 6/20/17

70

Seats and Restraints

{

Warning

If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.

To return the seatback to the upright
position:

1. Lift the lever fully while

applying pressure to the
seatback, and the seatback will
return to the upright position.
If the lever is lifted without
applying pressure, the seat will
release to a folded position.

2. Push and pull on the seatback

to make sure it is locked.

The second row seats can be folded
for additional cargo space or folded
and tumbled for easy entry and exit
to the third row seat.

Manual Fold and Tumble
Feature

{

Warning

Do not leave the second row seat
in a tumbled position while the
vehicle is in motion. A tumbled
seat is not locked. It can move
when the vehicle is in motion.
People in the vehicle could be
injured in a sudden stop or crash.
Be sure to return the seat to the
passenger seating position before
driving the vehicle. Push and pull
on the seat to make sure it is
locked into place.

Caution

Folding a rear seat with the seat
belts still fastened may cause
damage to the seat or the seat
belts. Always unbuckle the seat
belts and return them to their
normal stowed position before
folding a rear seat.

Folding and Tumbling the Seat

To fold and tumble the seat:

1. Make sure that there is nothing

under, in front of, or on
the seat.

2. Lift the lever, on the outboard

side of the seat, to release the
seatback.

«
...
69
70
71
72
73
...
»

Summary of Contents for YUKON 2018










































































































































































































































































































































































































































Reviews:

No comments

Related manuals for YUKON 2018

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: Baja Designs Pages: 5

Brand: UAZ Pages: 112

Brand: Ratio Pages: 12

Brand: Horn Tools Pages: 8

Brand: AL-KO Pages: 40

Brand: Edelbrock Pages: 2

FUEL TANK GAUGE

Brand: VDO Pages: 10

Brand: Whelen Engineering Company Pages: 2

Brand: LAS Pages: 4

Brand: LAS Pages: 24

Brand: Seecode Pages: 19

Brand: Metra Electronics Pages: 20

Brand: LAMBORGHINI Pages: 43

Brand: AccessECU Pages: 70

Brand: Tellur Pages: 5

UTV Rear Window

Brand: Tusk Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands