GMC YUKON 2018 Owner'S Manual Download Page 160

Page: 160 / 425

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-11349262) - 2018 - crc - 6/20/17

Instruments and Controls

159

Personalization Menus

The following list of menu items may
be available:

Time and Date

Language

Rear Seat Reminder

Video Voice-Over

Teen Driver

Valet Mode

Radio

Vehicle

Bluetooth

Apple CarPlay

Android Auto

Voice

Display

Rear Camera

Return to Factory Settings

Software Information

Wi-Fi

Detailed information for each menu
follows.

Time and Date

Manually set the time and date. See

Clock

126

Language

Select Language, then select from
the available language(s).

The selected language will display
on the system, and voice
recognition (if equipped) will reflect
the selected language.

Rear Seat Reminder

This allows for a chime and a
message when the rear door has
been opened before or during
operation of the vehicle.

Select Off or On.

Video Voice-Over

When activated, the RSI will read
aloud menu titles, menu listings,
pop-ups, alerts, and file titles from
audio and video media.

Select Off or On.

Teen Driver

See

“

Teen Driver

”

under

“

Settings

”

in the infotainment manual.

Valet Mode

This will lock the infotainment
system and steering wheel controls.
It may also limit access to vehicle
storage locations, if equipped.

To enable valet mode:

1. Enter a four-digit code on the

keypad.

2. Select Enter to go to the

confirmation screen.

3. Re-enter the four-digit code.

Touch LOCK or UNLOCK to lock or
unlock the system. Touch Back to
go back to the previous menu.

Radio

Select and the following may
display:

Manage Favorites

Number of Favorites Shown

Audible Touch Feedback

Bose AudioPilot

Summary of Contents for YUKON 2018










































































































































































































































































































































































































































Search results

Summary of Contents for YUKON 2018

Reviews:

Related manuals for YUKON 2018

Brands by name

Popular brands

GMC YUKON 2018, Owner'S Manual

Search results

Summary of Contents for YUKON 2018

Reviews:

Related manuals for YUKON 2018

Brands by name

Popular brands