GMC YUKON 2018 Owner'S Manual Download | Manualshive

Page: 321 / 425

background image

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-11349262) - 2018 - crc - 6/20/17

320

Vehicle Care

Fuses

Usage

17

Liftglass

18

Rear fog lamp (if
equipped)

19

Rear fog lamp (if
equipped)

20

Heated mirror

Relays

Usage

1

Rear window
defogger

Wheels and Tires

Tires

Every new GM vehicle has
high-quality tires made by a
leading tire manufacturer. See
the warranty manual for
information regarding the tire
warranty and where to get
service. For additional
information refer to the tire
manufacturer.

{

Warning

.

Poorly maintained and
improperly used tires are
dangerous.

.

Overloading the tires can
cause overheating as a
result of too much
flexing. There could be a
blowout and a serious
crash. See

.

(Continued)

Warning (Continued)

.

Underinflated tires pose
the same danger as
overloaded tires. The
resulting crash could
cause serious injury.
Check all tires frequently
to maintain the
recommended pressure.
Tire pressure should be
checked when the tires
are cold.

.

Overinflated tires are
more likely to be cut,
punctured, or broken by
a sudden impact

—

such

as when hitting a pothole.
Keep tires at the
recommended pressure.

.

Worn or old tires can
cause a crash. If the
tread is badly worn,
replace them.

(Continued)

«
...
319
320
321
322
323
...
»

Summary of Contents for YUKON 2018










































































































































































































































































































































































































































Reviews:

No comments

Related manuals for YUKON 2018

Green Motion Building

Brand: Eaton Pages: 12

Brand: LAMBORGHINI Pages: 48

Brand: M7 SPEED Pages: 11

Brand: Oldsmobile Pages: 360

Brand: Ford Pages: 12

Brand: Dometic GROUP Pages: 20

Brand: Romik Pages: 6

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

2014 Grand Cherokee SRT8

Brand: Jeep Pages: 596

Brand: Skoda Pages: 4

PRIME DESIGN VBI-FT21B

Brand: Safe Fleet Pages: 12

Plusone Console 4521011B

Brand: Honda Pages: 4

Brand: Cadillac Pages: 20

Brand: Vauxhall Pages: 131

Brand: Jaeger Pages: 13

Brand: Honda Pages: 253

Brand: Toyota Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands