background image

9

Extension cord support

During use of the blower vac, the extension cord will 

continually be pulled as you move from one area to another.
An extension cord support has been provided on the 

housing of the blower vac to assist in preventing the 

electrical connection between the extension cord and 

blower vac plug being forced apart.

Note.

 The support is for the extension cord, and not the 

cable from the blower vac.
1. To fit the extension cord to the support, make a tight 

loop in the extension cord, approximately 300mm from 

the socket on the extension cord.

2. Fit the loop into the 

square recess in the back 

portion of the blower vac 

on the underside of the 

housing (fig A).

3. Push the loop all the way 

through the housing by 

approximately 25mm.

4. Push each side of the loop 

downwards so each side of 

the loop fits over the hook 

inside the recess (fig B).

5. After, and only after the 

cable is correctly seated, 

plug the blower vac plug 

into the socket of the 

extension cable.

Operation of the blower vac

Prior to using the blower vac, ensure you have read and 

understood this instruction manual. 
Ensure you are wearing suitable clothing and also safety 

equipment like safety glasses, ear protection and a mask 

if necessary.
Ensure the attachments to the blower vac are correctly 

fitted and adjusted.
Be aware of other people and animals in the area where 

you are to be operating the blower vac.

To turn the blower vac on 

1. Plug the power cord into an approved electrical 

extension cord, and turn the extension cord on.

2. Ensuring the blower vac is 

directed in a safe direction, 

push the lock-off switch 

forward and depress the 

trigger switch, the blower 

vac will start (fig A). 

While holding the trigger 

switch the blower vac will 

continue to operate without 

the need to hold the lock-off 

switch.

To turn the blower vac off

To turn the blower vac “off”, simply release the trigger switch.

Important.

 After you have turned the blower vac off, do 

not leave the product until the blower vac has been fully 

disconnected from the electrical supply.

A

A

B

Summary of Contents for ULB2400













Reviews: