GMC Sierra Denali Classic 2007 Owner'S Manual Download

Page: 86 / 502

Your vehicle has
one double-sided key
for the ignition, all
door locks, and the
spare tire hoist lock if
your vehicle has one.

If you ever lose your keys, your dealer will be able
to assist you with obtaining replacements.

Notice:

If you ever lock your keys in your

vehicle, you may have to damage the vehicle
to get in. Be sure you have spare keys.

If you ever do get locked out of your vehicle, call
the GM Roadside Assistance Center. See

Roadside Assistance Program on page 474

Remote Keyless Entry System

Your keyless entry system operates on a radio
frequency subject to Federal Communications
Commission (FCC) Rules and with Industry
Canada.

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:

1. This device may not cause interference.

2. This device must accept any interference

received, including interference that may
cause undesired operation of the device.

This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:

1. This device may not cause interference.

2. This device must accept any interference

received, including interference that may
cause undesired operation of the device.

Changes or modifications to this system by other
than an authorized service facility could void
authorization to use this equipment.

Summary of Contents for Sierra Denali Classic 2007























































































































































































































































































































































































































































































































Search results

Summary of Contents for Sierra Denali Classic 2007

Reviews:

Related manuals for Sierra Denali Classic 2007

Brands by name

Popular brands

GMC Sierra Denali Classic 2007, Owner'S Manual

Search results

Summary of Contents for Sierra Denali Classic 2007

Reviews:

Related manuals for Sierra Denali Classic 2007

Brands by name

Popular brands