GMC Sierra Denali Classic 2007 Owner'S Manual Download Page 421

Page: 421 / 502

7. Make sure the tire is stored securely.

Push, pull (A), and then try to turn (B) the
tire. If the tire moves, use the wheel wrench
to tighten the cable.

8. Reinstall the spare tire lock (if equipped).

To store the jack and jack tools, do the following:

A. Wing Nut
B. Wheel Blocks
C. Retaining Bracket

and Wing Nut

D. Wheel Wrench

and Extensions

E. Tool Bag
F. Mounting Bracket
G. Jack
H. Retaining Hook

1. Put the tools (D) in the tool bag (E) and

place them in the retaining bracket (C).

2. Tighten down the wing nut (C).

421

Summary of Contents for Sierra Denali Classic 2007























































































































































































































































































































































































































































































































Search results

Summary of Contents for Sierra Denali Classic 2007

Reviews:

GMC Sierra Denali Classic 2007, Owner'S Manual, Page: 421 / 502

Search results

Summary of Contents for Sierra Denali Classic 2007

Reviews: