GMC Sierra Denali Classic 2007 Owner'S Manual Download

Page: 33 / 502

2. Push the latch plate into the buckle until it

clicks.

Pull up on the latch plate to make sure it is
secure.

When the shoulder belt is pulled out all the
way, it will lock. If it does, let it go back all the
way and start again.

If the belt is not long enough, see

Safety Belt

Extender on page 37

Make sure the release button on the buckle is
positioned so you would be able to unbuckle
the safety belt quickly if you ever had to.

3. To make the lap part tight, pull up on the

shoulder part.

Summary of Contents for Sierra Denali Classic 2007























































































































































































































































































































































































































































































































Search results

Summary of Contents for Sierra Denali Classic 2007

Reviews:

Related manuals for Sierra Denali Classic 2007

Brands by name

Popular brands

GMC Sierra Denali Classic 2007, Owner'S Manual

Search results

Summary of Contents for Sierra Denali Classic 2007

Reviews:

Related manuals for Sierra Denali Classic 2007

Brands by name

Popular brands