Securing a Child Restraint in a
Rear Seat Position
There is limited space in the rear seating area.
If you want to secure a child restraint in a
rear outboard seating position, be sure to study
the instructions that came with your child restraint
to see if there is enough room to secure your
seat properly.
If your child restraint is equipped with the LATCH
system, see
Lower Anchors and Tethers for
Children (LATCH) on page 51
.
If your child restraint does not have the LATCH
system, you will be using the lap-shoulder
belt to secure the child restraint in this position.
Be sure to follow the instructions that came
with the child restraint. Secure the child in the
child restraint when and as the instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and
shoulder portions of the vehicle’s safety belt
through or around the restraint. The child
restraint instructions will show you how.
3. Buckle the belt. Make sure the release button
is positioned so you would be able to unbuckle
the safety belt quickly if you ever had to.
58
Summary of Contents for Sierra Denali Classic 2007
