Fig. 8
Control button/Microphone
10.
Consider where to install control/microphone button. Keep in mind
control button must be within reach and facing driver for voice
commands and phone dialog (cable is 6ft. long).
We recommend
completing the rest of the install prior to securing the
control/mic button to the dash.
Once you decide on a location simply
remove tape backing from control /mic button
Ensure no ventilation duct is pointed towards the mic.
It is best to mount button facing driver
USB charging port install options
Should you decide to use charging port, we suggest one of 3 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole in the dash
B
.
Flush with Support bracket
(use this option to mount USB terminal
wherever your installation demands without drilling)
C
.
Free standing
(default)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 9
)
Fig. 9
Step drill bit
2.
Insert USB male terminal (See
Fig. 10
) through ¾” hole created in step
1 and connect to module USB port (See
Fig. 11
)
Fig. 10
6 ft. USB cable
