Bluetooth operation
1.
Press “BAND” button on radio to enter XM mode or CD/AUX button to
enter external CD changer or DVD mode
2.
Use radio volume button to set playback level
Music Commands
Use control button to perform the following music commands:
To
Proceed this way
Pause a Song
Press and release button
Resume Play
Press and release button
Skip to next song
Press button twice
Skip to Previous Song
Press button 3 times
AUX option* (
XM/Aux/DVD/changer)
Press button 4 times
Activate Voice Control
Press/hold button for 2 seconds
Switch out of XM Mode
Press and release button
Phone Commands
Use control button to perform the following phone commands:
To
Proceed this way
Answer call
Press and release button
End call
Press and release button
Reject incoming call
Press button twice (call goes to VM)
Cancel outgoing call
Press button twice
Activate Voice Control
Press/hold button for 2 seconds
Notes:
1.
If playback is distorted, adjust volume on Bluetooth device.
2.
To reset Module press and Hold button for 5 seconds
(this will not
un-pair phone or erase stored phones)
3.
On incoming calls, ring tone will play on car speakers
4.
Bluetooth range is approximately 30 ft. Ensure device is within range
5.
Voice command compatible with Apple (Siri), Android (Google Now),
Blackberry (Assistant)
6.
* Control button will not control XM/Aux/CD changer/DVD functions.
Use radio button assigned to these functions or aux device built-in
control for music selection.
7.
Upon ending call, music streaming resumes, however to resume
XM/AUX playback, press control button 4 times.
If successful go ahead and Reinstall the Radio
Congratulations, you’ve just updated your vehicle to support new technology
while preserving the original radio and dash components.
Enjoy!
