Fig. 11
Module USB port
3.
Push USB head (See
Fig. 12
) in place and snap to surface (See
Fig. 13
)
Fig. 12
USB head
Fig. 13
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
(See
Enabling the AUX
section below)
B.
USB with Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 6 ft. of radio to mount
USB support bracket (See
Fig. 14
) using adhesive backing or screws
Fig. 14
USB mounting bracket
2.
Insert USB male terminal through bracket (See
Fig. 15
) and connect to
module USB port (See
Fig. 11
)
Fig. 15
3.
Push USB head in place and snap to surface (See
Fig. 16
)
Fig. 16
4.
Tuck and secure any extra wire away from moving parts and test
operation (
See Initial Radio Setup
)
C.
Un-Mounted (Free Standing) Terminal
Connect and install your device USB charging cable.
USB Port is for charging devices requiring less than 1.8A—Power
hungry devices may not charge.
