Optional 3.5MM JACK + USB Charing Cable
This option works best for charging and aux input options and can be mounted to
vehicle using included bracket or by drilling hole.
To install simply connect USB and 3.5mm to module USB and AUX input, route
and install terminal to dashboard (drilling required) or bracket (no drilling).
Secure module and proceed to section next section.
Bluetooth pairing and connection
This process is to be performed upon initial install at which the GM3x-HF will
automatically reconnect with paired device upon entering vehicle.
1.
Turn vehicle ignition to “ON”.
2.
Red LED inside module should flash (otherwise check ground and
accessory wires)
3.
Access smartphone Bluetooth menu settings, and search (scan) for
devices.
4.
Select BlitzBlueG2 and click “Connect”
Note: Supports multiple phones but connects to only one phone at a time.
Warning:
Caller ID or text display from music apps is
not possible
.
Operating Bluetooth device by pressing the control button or Voice
recognition application. Use factory radio volume button to control
playback level
