
PM 1001484 000 06
Device handbook SINEAX DM5000
43/87
•
Fault current
: Configuration of the fault current channels, especially alarm and prewarning limits,
transformer ratios as well as response and dropout delay
•
Monitoring functions
: Definition of up to 8
with up to three inputs each, delay
times for ON / OFF and description text
•
Summary alarm
: Selection of the monitoring functions to be used for triggering the
and selection of a possible source for resetting
•
Operating hours
: Selection of the running condition for up to 3 operating hour counters
•
Digital outputs | Digital output
: State, pulse or remote controlled
width, polarity, number of pulses per unit
•
Digital outputs | Relay
: State or remote controlled relay output with source
•
Analog outputs
: Type of output, source, transfer characteristic, upper/lower range limit
•
Security system
: Definition of password and password protection active/inactive
•
Demo mode
: Activation of a presentation mode; measurement data will be simulated. Demo mode
is automatically stopped when rebooting the device.
•
Device tag
: Input of a free text for describing the device
7.5.2 Configuration via web browser
It’s recommended to use either Google-Chrome or Firefox as browser.
Internet Explorer works with limitations only (partly missing texts, firmware update not possible)
For configuration via web browser use the device homepage via http://<ip_addr>. The default IP address
of the device is 192.168.1.101.
This request works only if device and PC are in the same network when applying the subnet mask
(
).