manualshive.com logo in svg

GMC Camille Bauer SINEAX DM5000, Operating Instructions Manual

Share
Download
GMC Camille Bauer SINEAX DM5000 Operating Instructions Manual Download Page 63

PM 1001484 000 06  

Device handbook SINEAX DM5000

 

 

  63/87

 

Applied regulations, standards and directives 

IEC/EN 61010-1  

Safety regulations for electrical measuring, control and laboratory equipment 

IEC/EN 61000-4-30 Ed.3    Power quality measurement methods 

IEC/EN 61000-4-7 

General guide on harmonics and interharmonics measurements   

IEC/EN 60688  

Electrical measuring transducers for converting AC electrical variables into analog or 
digital signals 

DIN 40110  

AC quantities 

IEC/EN 60068-2-1/  

Ambient tests 

            -2/-3/-6/-27:  

-1 Cold, -2 Dry heat, -3 Damp heat, -6 Vibration, -27 Shock 

IEC/EN 60529   

Protection type by case 

IEC/EN 61000-6-4   

Electromagnetic compatibility (EMC): Emission standard for industrial environments 

IEC/EN 61000-6-5   

Electromagnetic compatibility (EMC): Immunity for equipment used in power station and 
substation environment 

IEC/EN 61131-2  

Programmable controllers - equipment, requirements and tests 
  (digital inputs/outputs 12/24V DC) 

IEC/EN 62053-31  

Pulse output devices for electromechanical and electronic meters (S0 output) 

UL94  

Tests for flammability of plastic materials for parts in devices and appliances

 

2011/65/EU (RoHS) 

EU directive on the restriction of the use of certain hazardous substances 

 

Warning 

This is a class A product. In a domestic environment this product may cause radio interference in which 

case the user may be required to take adequate measures. 

 

This device complies with part 15 of the FCC:  

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including interference that may cause 
undesired operation. 

This Class A digital apparatus complies with Canadian ICES-0003.  

 
 

 

 

 

Summary of Contents for Camille Bauer SINEAX DM5000
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands