Voice Recognition
The navigation system’s voice
recognition allows for hands-free
operation of navigation, phone,
audio system, climate controls,
windows, OnStar
®
, and memory
features. This feature only works if
the map DVD is inserted. See
“Installing the DVD Map Disc” under
Maps on page 36.
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active.
See “Retained Accessory Power
(RAP)” in the Index of your vehicle’s
owner manual for more information.
To use voice recognition:
1. Push and hold the talk symbol
steering wheel control until a
beep is heard. The audio system
mutes.
While in the navigation screens,
the system displays a symbol
(
|
) while the voice recognition is
active.
2. Clearly state one of the
commands listed on the following
pages.
Helpful Hints for Stating
Commands
•
When a multiple command is
available, choose the command
that best works for you.
•
Words that are in brackets are
optional. For example, for the
command Radio [band] [select]
FM, stating Radio FM or
Radio select FM are both valid
commands.
•
When the system recognizes the
command the system:
− Either performs the function
− Asks you to confirm your
choice by clearly stating
“yes or no”
− Issues an error message such
as “System does not
recognize this command” or
direct you to “Please start
speaking after the beep”
•
If the system is not yet ready, the
system may state “System is
checking the disc. Please wait.”.
•
To cancel a command or if
the system response does
not match the verbal command,
press and hold the talk symbol
button. The system replies,
“System will cancel the voice
recognition”.
•
If difficulty with the system
recognizing a command is
experienced, try saying it more
softly, and wait for a few seconds
after the beep, or you may just
try saying it again.
Infotainment System
91
Summary of Contents for Cadillac STS 2010
Page 2: ......