![background image](http://html.mh-extra.com/html/gmc/cadillac-sts-2010/cadillac-sts-2010_manual_2235710017.webp)
4. Select the audio band. The
presets within each list can
be mixed: AM, FM, or XM™,
if equipped.
5. Seek, scan, or tune to the
desired station.
6. Press and hold one of the six
preset screen buttons for
more than two seconds or until a
beep is heard.
7. Press the
e
(audio adjust) hard
key to adjust the tone, Digital
Signal Processing (DSP),
fade, and balance. The screen
times out and the changes
are stored to the preset station.
8. Repeat the steps for each preset
and list.
Audio Adjust
e
(Audio Adjust): Touch to
access the AUDIO ADJUST menu
and to adjust the tone, Digital
Signal Processing (DSP), fade,
and balance for all sources.
The system automatically stores
audio adjustment settings as
changes are made to a preset
station.
Audio Pilot (Noise Compensation
Technology): The vehicle has
Bose AudioPilot
®
noise
compensation technology.
To use this feature, touch the Audio
Pilot screen button. To turn it off,
touch the screen button again. The
button highlights when this
feature is on.
When on, AudioPilot
®
continuously
adjusts the audio system
equalization, to compensate for
background noise, so that the music
always sounds the same at the
set volume level.
This feature is most effective at
lower volume settings where
background noise can affect how
well you hear the music being
played through the vehicle’s audio
system. At higher volume settings,
where the music is much louder
then the background noise,
there may be little or no adjustments
by AudioPilot
®
. For more information
on AudioPilot
®
, visit
bose.com/audiopilot.
Infotainment System
17
Summary of Contents for Cadillac STS 2010
Page 2: ......