background image

EG Decleration of Conformity:

 

 

  

 

 

 

For the products
GM-GENIUS RACE 80R Order No. 7156
GM-GENIUS RACE 120R Order No. 7158
PROGRAMMER Order No. 7152 for GM-GENIUS RACE 80R, 120R 
We con

fi

 rm that the electromagnetic compatibility directives (2004/108/CE) are met.

Harmonized standards applied:
EN 61000-6-1
EN 61000-6-3

Graupner GmbH & Co. KG
Henriettenstr. 94-96
73230 Kirchheim/Teck

Managing Director Stefan Graupner        

73230 Kirchheim/Teck, den   29.04.2011 

 

 

   Signature

Environmental Protection Notes

When this product comes to the end of its useful life, you must not dispose of it in the ordinary 
domestic waste. The correct method of disposal is to take it to your local collection point for re-
cycling electrical and electronic equipment. The symbol shown here, which may be found on the 
product itself, in the operating instructions or on the packaging, indicates that this is the case.

Individual markings indicate which materials can be recycled and re-used. You can make an important 
contribution to the protection of our common environment by re-using the product, recycling the basic 
materials or recycling redundant equipment in other ways. 

Remove batteries from your device and dispose of them at your local collection point for batteries.

If you don’t know the location of your nearest disposal centre, please enquire at your local council of-

fi

 ce.

Manual  Genius Race  

                                                                                                                                        

08

Summary of Contents for 7156 Genius Race II 80R













Reviews: