11 Declaration of Conformity
PC 65 Crimper Operating Instructions – Vers. 1.0
Page 38
of 39
11
Declaration of Conformity
EU Declaration of Conformity
in accordance with the Machinery Directive 2006/42/EC, Annexe I
We hereby declare that the product designated below conforms to the essential
safety and health requirements set forth in the EU Machinery Directive,
both in terms of the product's conception and design as well as the version of the product placed on
the market by us.
In case of any alterations to the product that have not been authorised by us in advance,
this declaration shall no longer be valid.
GLW GmbH
Steinbeisstr. 2
88353 Kißlegg
The manufacturer bears sole responsibility for issuing this declaration of conformity.
PC 65 crimper
We likewise declare conformity with the following directives/provisions,
which are equally applicable to the product:
EU directive EMV 2014/30/EU
EU directive RoHS2 2011/65/EU
Applicable harmonised standards, in particular:
DIN EN ISO 12100:2010
Safety of machinery - General design guidelines - Risk assessment and risk mitigation
EN ISO 4414: 2010
Fluid technology — General rules and safety requirements for pneumatic installations and their components
EN ISO 13849-1:2015
Safety of machinery - Safety-related parts of control systems - Part 1: General design principles
EN ISO 13857: 2008
Safety of machinery — Safety clearances to prevent hazard zones being reached by upper and lower limbs
Kißlegg, 02/08/2019
Management
