GLW EC 65, Operating Manual

Page: 38 / 92

SAFETY EC 65
12/09
2
Correct use of the device
The EC 65 is designed exclusively for crimping work.
Only crimp dies with the matching cross sections according to the company supplementary
sheet may be used.
Never insert solid metal parts or similar objects; this would destroy the crimp die.
Unauthorised conversions which go beyond mere retooling and modifications to the EC 65 are
prohibited for safety reasons!
!
Correct use of the instrument includes observation of all the instructions and the
prescribed operating conditions.
Danger sources
The EC 65 may only be operated with the protective cover fitted.
The mains plug must be pulled out prior to doing any work which entails removing the protective
cover (e.g. adjusting the die). The device should be switched off at the mains switch during breaks
and when not in use.
Work places
The following places should be avoided for operation and storage:

damp or dusty places,

places exposed to high temperatures, direct sunlight or low temperatures
(operating range: 10°C to 40 °C).
Do not spill liquids onto the EC 65.
Do not expose the EC 65 to strong vibrations and impact.
Protective devices
The EC 65 is switched off by

the mains switch (0 pressed, LED dark).

pulling out the mains plug.

pulling off the protective cover.
The protective cover is fitted for the operator’s safety. It may on no account be modified, removed
or bypassed by conversions.
A sign on the bottom of the instrument warns of potential dangers.