GLW EC 65, Operating Manual

Page: 44 / 92

START-UP EC 65
12/09
8
1. Selecting the installation site

The installation site must be level and horizontal.
!
The conditions in the SAFETY chapter under Work Places must be observed.
2. Removing the protective cover

Unscrew the screw (1).

Pull off the protective cover (2).
3. Mounting the crimp die
!
Note installation position:
Small cross section at front.
Large cross section at back.

Insert bottom die (1).

Screw in screw (2) loosely .

Insert top die (3).

Screw in screw (4) loosely .
Figure 3 Removing the protective cover
Figure 4 Mounting the crimp die