10
●
Protect the unit against frost.
●
It is forbidden to make changes to
the tank (welding, brazing, etc.).
●
Only use original GLORIA spare parts
for repairs.
●
Important note!
Undue strain
caused by the mode of operation (in-
cluding transport to site where used
and storage when not in use), envi-
ronmental influences (at the site
where used and where stored when
not in use), insufficient maintenance
and care may lead to premature
wear and tear of the unit. For this
reason, always check the unit before
use to make sure that it is in a safe
and operable condition, at least,
however, for outwardly recognisable
signs of damage. To ensure contin-
ued safe operation of the unit, a
technician, preferably from the man-
ufacturer’s service department,
should inspect the unit in the event
of defects affecting safe operation, in
particular, but at a minimum every
12 months.
The national regulations applicable
at the place of use regarding safety
at work and the national regulations
applicable to the company must be
complied with.
We reserve the right to make
technical changes!
CE-statement of conformity for a
module within the meaning of
Art. 3, section 2 of the directive on
pressurized equipment 97/23/EG
BRILL GLORIA
Haus- und Gartengeräte GmbH
Därmannsbusch 7
D-58456 Witten
confirms that the water supply unit
Item no. 415....
certificate - no. (Module A1):
07202 1403 Z 0003 / 7 / D001
comply with the directive on pressurized
equipment 97/23/EG and the
recognized rules of technology .
The procedure for the statement of con-
formity for the module and for the tank
is based on module A1 (Appendix III) of
directive 97/23/EC.
Notified body, TÜV NORD Systems
GmbH & Co. KG.
Witten, 08.03.07
Hans-Georg Wellerdiek
(Design Manager)
RZ_976213.qxd 12.03.2007 15:34 Uhr Seite 10
