206M 201805
8
spare parts provided by manufacturer
.
-
Clean the machine once every day after work. Clean the dirt on the turntable with
diesel oil once per week and lubricate the slides and jaws.
-
Following maintenance must be done at least once per month:
Check oil level in Oil Fog Maker, please be filled with SAE30# oil if need.
Unscrew with hex wrench (E). Based on connection of compressed air, first to tread Jaws
open and close Pedal or Turntable Rotation Pedal 5-6 times, and then check whether
oil in Oil Fog Maker drops down a drip of oil. For continuous operation, tread twice
every time, drop down a drip of oil, and otherwise adjust the screw (D) that controlled oil
-enter with minus screwdriver.
(Fig 9)
-
As shown in Figure 9-1, when you found there are some water in the cup, push up the drain valve to drain away water
with your fingers; loosen your fingers after drained water, drain valve can be automatic closed under the action of the
spring.
Note: After the first 20 days of use, retighten the jaws with tightening screws (B) on the Turntable (Fig 10)
Note: in the event of turntable lose power, check to see if the belt is tight as follow
step
s:
Remove the left side cover by unscrewing the screws; adjust two screws located on the
motor support, keep a suitable distance between motor support and motor base; tight the
screws for the belt tension.(Fig 11)
Caution: please disconnect the machine from electric power supply and pneumatic
power supply
.
N
ote: If Hexagonal Vertical Arm not be locked or not meet the requirement that 2-3mm from the bottom of
Mounting/demounting head to rim, please adjust Hexagonal Locking Plate, refer to Fig 12 and adjust the
(X).
Note: In order to achieve the reliability of jaws and Bead Breaker shovel, operate as follows to keep their valves clean:
1. Remove the left side cover of the machine body by unscrewing the two screws;
2. Loosen the valve Muffler (A) which belong to Jaws open and close Pedal and Bead Breaker Pedal;
(Fig 13)
3. Clean the mufflers with compressed air, please replace it referring to the spare parts list if it is damaged.
(Fig 13)
Fig 11 Fig 12
Fig 13
Fig 10
