Page 16
This Globe mixer will provide years of uninterrupted service if you do the following:
Installation
• Do not use an extension cord to connect electrical power.
• Make sure all 3 Phase units (see data plate) run in the direction of the arrow on the front of the machine.
Operation
• Turn off mixer before changing speeds.
• Follow the Capacity Chart for mixing dough. Refer to Capacity Chart section.
• Use only first (1) speed for mixing dough. Second (2) speed should never be used on 50% AR or lower with
the exception of the SPC60. The SPC60 requires a 50% reduction in batch size to mix in speed 2 with 50%
AR dough.
• If the unit shuts off during mixing (overload protection trips), reduce the batch size.
Maintenance
Important Points
Recommended Maintenance
PART
REQUIRED ACTION
FREQUENCY
Bowl Slide Rods
Apply Globe oil (mineral oil) on the
bowl slide rods. Raise and lower the
bowl to distribute the oil onto the
rods.
If the bowl becomes difficult to
raise or lower.
Gear Oil Meter
(SPC62P and SPC80PL only)
Contact a Globe authorized servicer
to change the gear oil.
Once a year. When the gear oil
meter shows the oil below
half of the circle.
Summary of Contents for SPC10
Page 2: ......
