Page 7
Installation
UNPACKING
1. Inspect the package carefully before unpacking. Note any damage on the delivery paperwork and take
pictures.
2. Unpack the slicer immediately after receipt. If the machine is found to be damaged, save the packaging
material and take pictures of damage. Contact the carrier within fifteen (15) days of delivery and immediately
contact your source of the equipment.
You have no recourse for damage after fifteen (15) days of
receipt.
3. With the slicer you should receive a: wall chart, lubricating oil and an instruction manual. Contact Globe or
your local supplier if you did not receive all of these items.
TO AVOID SERIOUS PERSONAL INJURY
PROPERLY INSTALL SLICER IN ADEQUATE WORK AREA
• ALWAYS
install equipment in a work area with adequate light and space.
• ONLY
operate on a solid, level, nonskid surface that is nonflammable.
• NEVER
operate slicer with a damaged power cord or power plug.
• NEVER
operate slicer with an extension cord.
• NEVER
bypass, alter, or modify this equipment in any way from its original condition. Doing so can
create hazards and will void warranty.
• NEVER
operate slicer without the knife cover and knife sharpener securely installed (top mounted
knife sharpener only).
• NEVER
operate slicer without the warning labels attached to slicer (see Key Components of the Slicer
section) and the Globe wall chart posted within view of operator.
INSTALLATION:
1. Read this manual thoroughly before installation and operation.
DO NOT
proceed with installation and
operation if you have any questions or if you do not understand everything in the manual. Contact your local
representative or Globe first.
Make sure to clean and sanitize your entire slicer before use. Refer to this
manual for cleaning and sanitizing guidelines.
2. Select a location for the slicer that has a level, solid, nonskid surface that is nonflammable and is in a well-lit
work area that is away from children and visitors.
USE AT LEAST TWO PEOPLE TO MOVE SLICER TO OPERATING LOCATION. NEVER
ATTEMPT TO MOVE SLICER ALONE.
3. Remove slicer from the corrugated box.
NEVER USE SLICER WITHOUT FOUR RUBBER FEET SECURELY INSTALLED ON UNIT.
4. Make sure rubber feet are firmly tightened.