Page 20
Knife Removal Option
KNIFE REMOVAL OPTION
A factory available, knife removal option allows the knife to be removed.
Use two hands when handling knife removal tool.
If dropped, damage to knife and knife removal tool can
occur. Replace knife removal tool.
Knife Removal
Figure 20-1
Figure 20-2
Figure 20-3
Figure 20-4
Figure 20-5
Figure 20-6
Figure 20-7
1. Turn knife motor off, turn slice thickness dial clockwise past zero (0) until it
stops so the table covers the knife edge, and unplug the power cord. Wipe
off all visible food/food debris and juices from the entire slicer.
2. Carefully wash and rinse the top of knife by wiping from the center of knife
outward (Fig. 20-1).
3. On the shaft under the knife, align (-) with (▲) (Fig. 20-2).
4. Before installing knife removal tool, both handles must be rotated outward
(Fig. 20-3).
5. Align knife removal tool with locations on ring guard (Fig. 20-4).
6.
Use hand to firmly turn top handle inward (Fig. 20-5).
7.
Use hand to firmly turn bottom handle inward (Fig. 20-6).
8. Use both handles to lift knife removal tool & knife away from
slicer (Fig. 20-7).
9. Clean and sanitize knife and knife removal tool in sink or dishwasher.