Page 13
Setting Up Tare Preset Functions Keys
1. Make sure the scale is plugged in, turned on and there is nothing on the
weigh platter.
2. Key in 9000 and press the Mode key. Display will show: P00 PROGRAM
3. Key in 4 and press the Enter key. Display will show: P04 PRESET KEY
4. Key in 111111 and press the PLU key. Display will show: P04 PRESET KEY
5. Press the Enter key. Display will show: P04-01 000 0 000
6. Press the desired preset key. See Figure 13-1.
NOTE: Make sure to mark the selected preset key with the PLU name
on the Operating Keysheet. See Figure 13-2.
NOTE: Two values can be stored on each preset key. The Lower Level
preset function key is used to switch between upper and
lower level. Refer to Operating Instructions (Function Keys).
7.
Key in 2 for the preset function key flag number and press the Enter key.
Display will show: P04-01 002 “1” 0
8. Key in weight of the container. Press the desired preset key. See Figure
13-3.
NOTE: Weight of the container must be entered in 3 or more decimal
places. Example, if the weight of the container is 0.5 pounds,
enter 500 with no decimal places. If the weight of the
container is 1.5 pounds enter 1500 with no decimal places.
9. Press the Mode key three times to return to normal operation.
Preset Key Set Up
Figure 13-2
Preset
Key
Figure 13-1
Preset
Key
Figure 13-3
Preset
Key
Container
Weight
Preset Function
Key Flag
