TO MAXIMIZE THE EFFECTIVENESS OF YOUR UVC DEVICE
OPERATING DIRECTIONS
The efficiency of this product has been scientifically tested in a lab against Staphylococcus Aureus (ATCC6538), Escherichia Coli (10389), Salmonella
Typhimurium (ATCC14028), and influenza. To increase the level of neutralization, place the work light from the item/surface at the minimal recommended
distance for a longer period. Products will still be effective when distance is increased but will require a longer exposure to the UV light to neutralize germs.
When used as directed, the following results will be obtained at the given distance and time:
A) Optimal Use
For maximum antibacterial neutralization, the light should be
placed at 1.5 feet (0.45m) away from the surface for 60 minutes.
B) Optional Use
When the light is placed at 2.5 feet (0.76m) for 60 minutes, the percentage
of antimicrobial neutralization should reach over 91% depending on the
surface conditions.
66466
WARNING: Please follow the below instructions carefully to ensure the proper use of your device.
SAFETY FEATURES:
1. To avoid being exposed to the UV light, the work light is designed with a built in start delay that will allow you to leave the area before turning on and
exposing you to UV light.
2. To prevent the UV light from being accidentally left on, the UV light will automatically turn off when the work light has been on for 60 minutes.
NOTICE:
To maximize the effectiveness of the product, surfaces should be relatively clean and free of grime, dust, and other materials that will prevent the
germs from being directly exposed to UV-C Light.
1. Place the work light in the chosen location by using the magnetic feet
or H-stand. Use the knobs to adjust the work light head to face in the
direction of the desired item/surface. Retighten the knobs to secure.
3. Once the light has reached the 60-minute neutralization time, the work
light will automatically power off.
4. Remove UV-C work light and store in a safe place away from children.
2. Press the Power On/Off button on the device. The 10 seconds safety
start delay will enable you to leave the area before being exposed to the
UV light.