66466
INTRODUCTION TO UV TECHNOLOGY
SAFETY PRECAUTIONS
READ AND SAVE ALL INTRUCTIONS
To ensure the safety and proper usage of this product, please consult this instruction manual before initial use. Even with built-in safety features, it is
important to handle all UV Light devices with care, using only as directed, and closely following the provided instructions for each product. Improper use
of this light can result in injury. Follow all safeguards stated in this manual in addition to normal safety precautions when working with electrical devices. DO
NOT attempt to service this device.
WARNING:
DO NOT ALLOW ANY EXPOSURE OF THE ULTRAVIOLET LIGHT TO:
Children
Eyes
Skin
Pets
Plants
DANGER
Always direct the UV-C light AWAY from the eyes
and skin. Direct prolonged exposure of eyes or skin
to The UV-C light bulb can cause serious skin burn
and eye inflammation from short wave ultraviolet
radiation. Radiation from these lamps is harmful to
the eyes and skin.
DANGER
Application of UV-C light to existing mold growth
can cause respiratory irritation and allergic
symptoms. Do not use UV-C light where active
mold growth exists. Remove active mold growth
from surfaces prior to exposure.
POTENTIAL MOLD
SPORE RELEASE
The sun produces a broad spectrum of light, including a portion invisible to the human eye called Ultraviolet. This ultraviolet light has a wavelength shorter
than that of visible light, and is generally subdivided into UV-A, UV-B, and UV-C. While Near-UV is not technically within the ultraviolet spectrum, it shares
certain useful germicidal properties. Short-wave ultraviolet light, such as UV-C (100nm to 280nm), damages DNA and disinfects surfaces with which it comes
into contact. Fortunately for us, the sun’s UV-C light is absorbed by the earth’s Ozone layer, protecting us from its harmful effects.
Man-made UV-C technology was developed to harness the sanitizing/germicidal properties of UVC and has been around for over 100 years. UV-C Light
destroys the ability of harmful pathogens / infectious microorganism to multiply by damaging their DNA structures and deactivating their reproductive
capabilities. Our products allow our customers to use these potent effects to their advantage by targeting and neutralizing germs, bacteria, and other
harmful pathogens that make us sick. Not only is this method cost saving for consumer but when operated correctly, UV-C Light can kill up to 99.99% of
germs, viruses, bacteria, and molds, such as Salmonella, E. Coli, Staphylococcus aureus, and Influenza. This also includes reducing odors caused by bacteria.
The next generation of clean provides a no contact chemical-free approach that is environmentally friendly, reusable, and sustainable.
1. Keep device away from children and pets
2. Do not leave product unattended while on.
3. Do not drop the device.
4. Do not look directly into the UV light source.
5. May damage certain fabrics and materials, and exposure may cause paint to fade over time.
6. Ensure that the device is used only for its intended purpose; cleaning keyboard, tablet PCs,
infant accessories, mobile phones, toilet seats, doorknobs, cutting boards, kitchen utensils
and other required surfaces. Any other usage is NOT recommended by the manufacturer as
it may cause damage to the user or device.
7. Refrain from operating the device if it has been damaged.
8. Do not use the product if there is any sign of battery leakage as it may cause damage to the
work light.
9. Allows allow the product to cool down completely before storing. When not in use, remove
batteries and store in provided travel bag. Store in a safe place, out of reach of children.
DANGER:
DO NOT ALLOW THIS PRODUCT TO BE EXPOSED TO WATER OR ANY OTHER TYPE OF
LIQUID OR EXCESSIVE MOISTURE.
STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this devised must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Designed and manufactured by
GLOBE ELECTRIC COMPANY INC.
150 ONEIDA, MONTREAL, QUEBEC, CANADA H9R 1A8
Made in China
www.globe-electric.com
Customer Service: 1-888-543-1388
FCC Responsible Party:
Globe Electric
1-888-353-1388
15301 Shoemaker Ave
Norwalk, CA 90650
www.globe-electric.com
CAN ICES-005(B)/CAN NMB-005(B)