Globaltronics GT-HDi-02, Operation And Guarantee

Page: 11 / 17

17 18
SCOPE OF DELIVERY
1. Ionic Hairdryer GT-HDi-02
2. Styling nozzle
3. Operating instructions
DESCRIPTION OF PARTS
1) Styling nozzle
2) LED indicator for the ion function
3) Air intake grill (hair filter)
4) Cool level button (“Cool-Shot”)
5) Heat level switch
6) Ventilation level switch
7) Suspension loop
TECHNICAL DATA
Model: GT-HDi-02
Voltage: 220 - 240 V ~ 50/60 Hz, 2200 W
CONFORMITY DECLARATION
The conformity of the product with the prescribed standards is guaranteed.
The complete conformity declaration can be found on the Internet at
www.gt-support.de
Manufacturer:
Globaltronics GmbH & Co. KG
D-20095 Hamburg,
Domstraße 19
Country of origin: China
7
THANK YOU FOR YOUR TRUST
We congratulate you on your new ionic hairdryer and are convinced that you will be
satisfied with this state-of-the-art appliance.
In order to guarantee that your ionic hairdryer always functions and performs at an
optimum level and to ensure your personal safety, we have one request:
please read through these operating instructions carefully prior to initial use and
especially follow the safety instructions!
All activities on and with this appliance may only be carried out as described in the
operating instructions.
If you should pass on the ionic hairdryer, please include the operating instructions.
packaging
For protection from damage during transport, your ionic hairdryer is contained in packaging.
Packaging is a raw material and can therefore be reused or submitted for recycling.
GENERAL SAFETY INSTRUCTIONS
Only connect the Hair Dryer to a properly installed socket with a nominal voltage
of 220-240V.
This appliance fulfils the CE regulations and corresponds to the Directives 2006/95/
EC and 2004/108/EEC.
• In case of operating faults, prior to any cleaning and if the appliance is not in use,
always disconnect the mains cable! Never pull on the mains cable!
• Never immerse the appliance in water and do not expose it to rain or other
moisture!
• If the appliance should fall into water, only remove it from the water when the
mains plug has been disconnected! After this, do not operate the appliance, but
rather, first have it inspected by an authorised service centre. This also applies, if
the mains cable or the device are damaged or if the hairdryer has fallen down.
• Please ensure that the mains cable and the appliance are never placed on hot
surfaces or near heat sources. Lay the mains cable, such that it does not come
into contact with hot or sharp-edged items.
• Do not use the hairdryer, if you are on a damp floor or if your hands or the
appliance are wet.
• Do not bend the mains cable and do not wrap it around the appliance.