3/22/17
Doc. No. MAN-600402 Rev. B
| 1 |
Confidential
CHAPTER
1
WallDoc Beta Installation
1.1
Overview
This document provides installation instructions for installing the WallDoc
Beta version with and without the Cisco
®
SX20 codec and network switch.
Please check the supplied hardware list and make sure you have all the
items:
•
Six HD wall anchors
•
Six 1/4-20 x 2” flat head Phillips screws
•
Two 5/16-18 x 1” hex head bolts
•
Four 5/16” flat washers
•
Two 5/16” nuts
•
Two Allen wrenches, one large, one small, in a blue plastic bag,
used for the arm adjustment
You will need the following tools to install the WallDoc Beta:
•
Drill
•
Stud finder
•
1/2” spade bit
•
Phillips screwdriver
•
Two 1/2” wrench or combination socket wrench with socket
•
5/32” Allen wrench, for attaching the camera to the WallDoc Beta
