background image

3/22/17

Doc. No. MAN-600402 Rev. B

| iii |

Confidential

Warranty and Return Policy

All GlobalMedia Group, LLC (GMG) products are warranted under the 
following terms:

Products that become defective during the first year after the order is 
shipped will be repaired or replaced by GMG free of charge. This limited 
warranty is contingent upon proper use of the product and does not cover 
products that have been damaged (scratches, bent metal, broken 
components) misused, modified, or subject to unusual physical or electrical 
stress. All returns for any other reason must be made within the first 30 
days from time of shipment and will be subject to a 25% restocking charge. 
Buyer must include all original components, literature, and packaging in the 
same salable condition received to avoid any additional charges.

All returned materials must have a GMG return materials authorization 
(RMA) number. Authorized returns must be shipped freight prepaid to 
GMG. GMG reserves the right to refuse any return that is sent COD or 
without an RMA number visible on the exterior of the package. 
Unauthorized returns, refused shipments, and authorized returns of 
nondefective merchandise after the above stated return periods are subject 
to additional charges. 

Limited Liability Agreement

No claim made by the buyer shall be for an amount greater than the 
purchase price of the goods in respect of which the claim was made, 
regardless of whether the claim pertains to damage incurred in shipping, 
failure to ship, or inherent defects. GlobalMedia Group will in no way be 
liable for incidental or consequential charges. In all events, GMG reserves 
the option of repair or replacement at its discretion. GMG takes no 
responsibility for incorrect, outdated, or otherwise inaccurate information, 
including pricing and product specifications. GMG is not responsible for 
typographical errors or omissions and shall not be liable for any incidental 
or consequential damages caused directly or indirectly from any GMG 
product. In addition, GMG reserves the right to change prices, 
specifications or discontinue products at any time without prior notice while 
reserving the right to refuse or conduct a cancellation on its transaction 
activities due to price inconsistency from its suppliers. 

©2002-2017 GlobalMedia Group, LLC All Rights Reserved.

Summary of Contents for WallDoc Beta






























Reviews: