WallDoc Beta Installation
3/22/17
Doc. No. MAN-600402 Rev. B
| 2 |
Confidential
The equipment is packed and shipped in foam inserts, as seen in
Figure 1
.
1.2
Mounting WallDoc Beta
1. Place the mounting bracket on the wall where WallDoc Beta will be
installed.
2. Measure 36 1/2 inches with a tape measure from the floor to the
bottom edge of the mounting plate and make a reference mark. The
bottom edge of the mounting plate will rest at this point (see
Figure 2
).
Figure 1Packed WallDoc Beta equipment
