2=CA!
% 5AHEAI
SECTION 3: CONFIGURATION
Rerouting the Coins
Whenever the coin tubes are rearranged, the
programmable acceptor has to be reconfigured
to route accepted coins to either the correct
tube or vendor cashbox.
To reconfigure the acceptor, apply power to the
Four-Tube Changer.
· Press inventory buttons A B and D simulta
neously for 2 seconds (until the acceptor
LED goes out).
· Release the inventory buttons, and the LED
will flash an alternating pattern of 1-second
ON/ 1second OFF, then 2 seconds ON/ 2
seconds OFF. This indicates the rerouting
process is waiting for a coin destination (coin
tube or cashbox) to be selected.
· To select a coin tube, press and release its
inventory button. Once the coin destination
has been selected, the LED will flash a 1-
second- 50% ON / 50% OFF sequence.
· Drop the appropriate coin for the tube you
have chosen into the acceptor. An accepted
and validated coin will be routed and as-
signed to the tube you’ve chosen.
Example: For a payout configuration of 25 – 10
– 10 – 05 (USD-_ 708)
-Press and release inventory button A, insert a
quarter through the acceptor.
-Press and release inventory button B, insert a
dime through the acceptor.
-Press and release inventory button C, insert a
dime through the acceptor.
-Press and release inventory button D, insert a
nickel through the acceptor.
Any coin dropped through the acceptor before a
coin tube is selected will be routed to the
vendor’s cashbox. Valid coins not assigned to a
tube will also be routed to the cashbox.
· To save the new routing information and exit
the rerouting mode, hold the coin return
lever down for 4-5 seconds (until the accep-
tor LED returns to its normal pattern) or
wait 45 seconds and the Four-Tube changer
will automatically save the routing informa-
tion and exit this mode.
NOTE: If power is removed from the changer
before the rerouting information is saved, all
new routing information will be lost.
