CAUTION:
Remove batteries if remote will not be used for long period of time; to prevent leakage which may
impair your remote control.
Do not allow water or liquid to get into the remote control.
CLEANING & MAINTENANCE
Regular and careful cleaning helps your infrared heater operate efficiently for many trouble free years.
Periodically inspect and remove any dirt or contaminants to ensure that the equipment can be operated
safely. To clean your heater, follow the steps below:
1.
Turn off and unplug the power cord.
2.
Make sure the heater is cool before continuing.
3.
To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use a
mild detergent if necessary. After cleaning, dry the unit with a soft cloth. WARNING: DO NOT let
liquids enter the heater.
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
5.
DO NOT immerse the heater in water.
6.
Wait until the heater is completely dry before use.
7.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
8.
DO NOT immerse the heater in water.
9.
Wait until the heater is completely dry before use.
10. Check the filthiness of the Reflector and IR-Filament at least once a month. Clean as needed.
11. The frequency of maintenance checks may be increased considering the amount of the dust in the
environment.
12. Check the condition of the Reflector, Wire and Frame visually while cleaning the appliance. In case
of deformation, consult with a qualified electrician.
13. Check the Power Cord and Plug visually while cleaning the appliance. In case of damage, consult
with a qualified electrician.
STORAGE:
Store the heater in a cool, dry location when not in use to prevent dust and dirt build up. Use packaging
carton to store.
CAUTION:
When the appliance is not operated for a long period of time, cleaning or maintenance is conducted or
when transporting, ALWAYS turn off and unplug the heater from the electrical connection.
WARNING:
Always disconnect the heater from the electricity supply and allow it to cool before attempting to
work on it.
If the heater has collected dust or dirt inside or around the heating element, have the unit cleaned
by a qualified service agent. DO NOT operate the heater in this condition.
The only maintenance required is cleaning of the external surfaces of the heater.
DO NOT touch the heating element with bare fingers, as residue from your hand could affect the life
of the lamp. If it is accidentally touched, remove the finger marks with a soft cloth moistened with
mentholated spirit or alcohol.
DO NOT attempt to repair or adjust any electrical or mechanical functions on this heater.
The heater contains no user serviceable parts. Should the product suffer damage or breakdown,
contact Global Industrial.
