CHAPTER 2 – INSTALLING A NEW CABINET
Chapter 2 ---- Installing a New Cabinet
Use the following procedures to setup your game:
•
Standard Cabinet.
Basic Cabinet Setup (page 7) + Standard Cabinet Installation (page 8).
•
Deluxe Cabinet.
Basic Cabinet Setup (page 7) + Deluxe Cabinet Installation (page 10).
•
Upright Cabinet.
Basic Cabinet Setup (page 7) + Upright Cabinet Installation (page 13).
Basic Cabinet Setup (All Models)
Use the following procedure to install a new cabinet:
1. Carefully remove the cabinet from the shipping container. Give yourself plenty of space around the cabinet
as you remove it from the shipping container. Inspect the exterior of the cabinet for any damage.
2. Remove the keys from the coin return slot. Open the coin door to locate the second set of keys. See
. On the deluxe model, the coin door and cash box are located on the driving console, not the main
cabinet.
Coin Door
Cash-Box Door
Cash-Box and
Loose Parts
First Set of Keys
Second Set
of Keys
Figure 2
– Coin Door and Cash-Box Door
3. Open the cash-box door and remove the loose parts inside the cash box. You will find the following items
(may vary with cabinet style):
–
GLOBAL VR Instruction Manual (this document)
–
10/100 Base-T Network cable
–
10/100 Base-T Crossover coupler
–
AC power cord
–
T-25 Torx Security Bit
4. Remove the back door from the cabinet and inspect the computer system. Verify that all cables and wires
are securely connected to the computer. See page 52 for a guide to the cable connections.
5. Connect the wall cord to a grounded (3-terminal) AC wall outlet.
6. Power ON the cabinet using the On/Off switch located on the lower rear of the cabinet to verify proper
operation.
Need For Speed™ GT
System Documentation
7
040-1201-01 Rev. C 5/28/2004
