Chapter 6 — Service and Repair
©2007 Global VR, Inc.
040-0168-01 Rev. B 3/14/2008
Page 43 of 64
Setting the Computer BIOS (CMOS)
This procedure applies to the Asus
P5N-MX
Motherboard. If your system has a different
motherboard, check
http://service.globalvr.com
for updated information.
If you are comfortable using the CMOS Setup Utility, connect a keyboard to the computer and
press the
DEL
key during boot to run the Utility. Select
Load Setup Default
from the
Exit
Menu first, and then check all of the settings shown in the table below. For more help, refer to
the detailed instructions that follow.
Menu
Submenu (if applicable)
Item
Setting
Exit
Load
Setup
Default
(Not applicable)
Legacy Diskette A:
Disabled
Primary IDE Master
WDC WD400BB
Main
Primary IDE Slave
Sony DVD-ROM
1st Boot Device
CDROM
2nd Boot Device
Hard Disk
3rd Boot Device
Disabled
Boot Device Priority
4th Boot Device
Disabled
Boot
Boot Settings Configuration
Halt On
No Errors
Power
APM Configuration
Restore on AC Power Loss
Power On
Important:
Your screens may not look exactly like the screens shown in this document, and some
settings shown on the screens pictures may be different from your system.
Do not change any settings that are not specifically described in this document.
1.
Power off the game and connect a keyboard to the computer. Power on and press the
DEL
key
during boot. The CMOS Setup Utility will start:
2.
Use the Arrow keys (
) to
highlight
Exit
from the top of the
screen, and the
Exit
menu will appear.
3.
Use the Arrow keys (
qr
) to select
Load Setup Default
, and press
Enter
.
4.
A prompt will appear saying
Load
Setup Defaults (Y/N)?
Make sure
YES
is highlighted and press
Enter
to
confirm the change.
