Chapter 6 — Service and Repair
©2007 Global VR, Inc.
040-0168-01 Rev. B 3/14/2008
Page 25 of 64
Chapter 6
— Service and Repair
GLOBAL VR assumes no liability for any damage or injuries incurred while
servicing the cabinet. Only qualified service personnel should perform
service and installation of cabinet hardware.
To prevent electrostatic discharge (ESD) damage, handle PCBs by the
edges only and use a grounding wrist strap or similar precaution.
Please read the service instructions before working on the cabinet.
Always turn the cabinet OFF and disconnect the AC power cord before
performing any repair work.
Access Panels on Cabinet Rear
Figure 14.
Cabinet Rear
Use the three access panels on the rear of the cabinet,
shown in Figure 14, to service internal components.
Monitor Access Door
: Open to access the LCD monitor
and cooling fan.
Electronics Access Panel
: Remove two (2) Torx
®
screws to open and access the Audio Amp PCB, GVRI/O
Mini PCB, Solenoid Relay PCB, and DC power supplies.
See Figure 15 on page 26 to identify the components.
Rear Door
: Open to access the Computer and AC
Power Distribution components.
Seat Pedestal Front Cover
(Not Shown): Remove
the six (6) Torx screws that secure this panel under
the front of the seat to access the Knocker Solenoid
Assembly or remove the seat.
