Section 1 Important Safety Instructions
1-2
1.2 Warnings and Cautions
WARNING
ELECTRIC SHOCK HAZARD. DO NOT EXPOSE THE CAMERA TO WETNESS OR HIGH
MOISTURE CONDITIONS. DO NOT USE NEAR WATER. DO NOT HANDLE PLUGS OR
CAMERA WITH WET HANDS
WARNING
ELECTRIC SHOCK HAZARD. DO NOT DISASSEMBLE OR MODIFY THE CAMERA OR
ACCESSORIES. REFER ALL REPAIRS TO QUALIFIED SERVICE PERSONNEL.
WARNING
DISCONNECT ALL ELECTRICAL POWER PRIOR TO CLEANING AND DISINFECTING.
RISK OF ELECTRIC SHOCK RESULTING IN DEATH OR INJURY IS POSSIBLE IF THE
ELECTRICAL POWER IS NOT DISCONNECTED PRIOR TO CLEANING THE UNIT.
WARNING
!
NO MODIFICATION OF THE EQUIPMENT IS ALLOWED.
WARNING
!
FAILURE TO FOLLOW THESE INSTRUCTIONS WILL RESULT IN DAMAGE TO THIS
SYSTEM OR POSSIBLE INJURY (RECEIVER’S RESPONSIBILITY).
CAUTION
!
USE ONLY THE PROVIDED POWER SUPPLY TO ENERGIZE THE CAMERA, OTHER
POWER SUPPLIES MAY CAUSE DAMAGE TO THE CAMERA.
CAUTION
!
BRIGHT LIGHT SHINING DIRECTLY INTO THE CAMERA LENS CAN CAUSE DAMAGE TO
THE CCD.
CAUTION
!
DO NOT PULL OR MOVE SYSTEM BY CORDS OR PULL CORDS AROUND SHARP
EDGES. KEEP CORDS AWAY FROM HEATED SURFACES.
CAUTION
!
THIS EQUIPMENT GENERATES AND USES FREQUENY ENERGY AND IS NOT
INSTALLED AND USED PROPERLY, I.E. IN STRICT ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. IT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS A COMPUTING DEVICE PURSUANT TO SUBPART J OF PART 15 OF FCC
RULES, WHICH ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
SUCH INTERFERENCE WHEN OPERATED IN A COMMERCIAL ENVIRONMENT.
CAUTION
!
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1.3 Product Precautions
• Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper handling
or storage could damage the camera.
• Do not pull or damage the camera cable.
• During camera use, do not wrap the unit in any material. This will cause the internal temperature of the
unit to increase.
• Do not expose the camera to moisture, or do not try to operate it in wet areas.
• Do not operate the camera beyond its temperature, humidity and power source ratings.
• While the camera is not being used, keep the lens or lens cap on the camera to prevent dust or contamina-
tion from getting in the CCD or filter area and scratching or damaging this area.
• Do not keep the camera under the following conditions:
In wet, moist, and high humidity areas
Under hot direct sunlight
In high temperature areas
Near an object that releases a strong magnetic or
electric field
Areas with strong vibrations
