26
Et h er n et O ut p ut M od ul e
Network Settings Panel
This panel (following figure) is displayed by clicking on the
0GVYQTM
5GVVKPIU
button on the
'VJGTPGV1WVRWV&GXKEG5GNGEVKQP
panel.
Figure 1.15: Network Settings Panel
The Network Settings panel allows the user to make network settings for
the Ethernet Output Module. The Network Settings panel has the
following fields:
0COG
Lets the user type in a new name to their Ethernet
Output Module.
+2
Displays the IP address of the Ethernet Output
Module in your GlobeCaster. This defaults to
127.0.0.1 which is
not
a valid address. You must
change the number. The number should be set to
an IP address on the same network as the ethernet
card in the encoder that the Ethernet Output
Module is connected to.
5WDPGV/CUM
Displays the subnet of the IP address associated
with the Ethernet Output Module. If you need to
change this, first consult your system
administrator.