22
Et h er n et O ut p ut M od ul e
Setting up your GlobeCaster with a Media Encoder
This section is intended to provide you with illustrations on how to make
the necessary connections between your GlobeCaster and an media
encoder.
Using the
6Q2%
port on your Ethernet Output Module.
The following diagram illustrates how to set up your connection through
the
6Q2%
port.
Figure 1.12: Connecting Using the To PC Port
In figure 1.12, a category 5 cable is connected from the
612%
port on the
Ethernet Output Module. The cable is then connected to a network card
on your media encoder. The media encoder often has two network cards.
One is connected to the GlobeCaster and then accepts a high bandwidth
audio/video stream. The second card streams one or more lower
bandwidth Internet or LAN streams.
PC on Internet
Media
Encoder
PC on Network
PC on Network
Host PC with Videonet Card
GlobeCaster
with E/O Module
To PC port on
GlobeCaster to the
Encoder
