globalspecialties.com
Global Specialties
13
451-032-001_rA
Description
Specification
AC Line Input
115 VAC @ 60Hz or 230 VAC @ 50 Hz (switchable)
Power Supplies
Fixed DC: +5 VDC 1.0 A max, current limited, Ripple <±5 mV
Variable DC: +1.3 VDC ±0.05 V @ 150 mA to +15 VDC @ 500 mA,
Ripple <±5 mV
Variable DC: -1.3 VDC ±0.05 V @ 150 mA to -15 VDC @ 500mA
Ripple <±5 mV
Binding Posts
(4) Ground, +5VDC, Variable ±VDC Power Supply Outputs
Pulsers
(2) Pushbutton-operated, open-collector output pulsers.
Each with 1 normally-open, 1 normally-closed output.
Each output can sink up to 250 mA.
Digital Function
Generator
Frequency Range: 0.1 Hz to 100 kHz in two ranges
Output Voltage: 0 to +10Vpp into 600 Ω Load (20Vpp in open circuit),
short circuit protected
Output Impedance: 600 Ω except TTL
Output waveforms: Sine, Square,Triangle & TTL
Sine Wave Distortion: <3% @ 1 kHz typical
TTL Pulse: Rise & fall time <25 ns, drives 100 TTL Loads
Square Wave: Rise and fall times <0.5 µs
Logic Switches
(8) Logic Switches select Logic High and Logic Low
Logic Low Level: Ground
Logic High Level: Switchable b5 V and the variable positive power
supplies.
Switches
(2) Single Pole Double Throw (SPDT) - uncommitted
Logic Indicators
LEDs
: 16 LEDs; (8) red to indicate logic high and (8) green to indicate logic low
Logic High Threshold
: 2.2 V (nominal) in TTL/+5 V mode, 70% (nominal)
of selected operating voltage in CMOS mode
Logic Low Threshold
: 0.8V (nominal) in TTL/+5 V mode, 30% (nominal)
of selected operating voltage in CMOS mode
All specifications apply to the unit after a temperature stabilization time of 20 minutes over an
ambient range of 20°C ± 5°C.
Specifications
