Manufacturers of Fire Detection Equipment
globalfire.pt
GFE-TCP-WEB -
CONFIGURATION MANUAL - 11/2017
Manual Configuration: Software
Connect interface to computer using only USB connector (no other cable should be connected). Regarding USB driver
installation, computers with Windows 10 do not require additional steps, while remainder Windows operating systems drivers
must be loaded in order to create a virtual COM (VCOM). Necessary drivers are available for download in our web page
. Interface communication is put in place via a 'serial port emulator'. We will use 'PuTTY' during next
steps and it's also available in installation package.
After connecting GFE-TCP-WEB to computer, check device manager to find number of COM port attributed to interface.
At this stage please execute 'PuTTY' directly available from GFE-TCP-WEB homepage indicated above, and select options
highlighted in bellow screenshot followed by 'open':
Next steps will be performed in console window created after clicking 'open' at PuTTY.
http://www.createc.pt/v2/gfe
Serie USB
(COM4)
