Global Contract Licence 2, Installation Manual

Page: 57 / 100

•Page globalcontract.com 56
GLOBAL
Contract
• Fall 2017
INSTALLATION GUIDELINES
L2TDHxxxxxx
Assembly
Required Tools
Safety Glasses Rubber Mallet Screwdriver #2 Phillips Screwdriver #2 Robertson
Blum Connector
(installed) L005650061
Included Hardware
NOTE: Open and assemble only one product
at a time to avoid a potential mix-up of parts
and hardware.
It is adviseable to assemble the unit on a
carpet to avoid scratches.
Modular Screw
L007250001
L2TAHxxxx
L2TEDHxxxxxxL
L2TPHxxxxL
L2TEDHxxxxxxR
L2TPHxxxxR
L2TEDHCOxxxxxxR
L2THHxxxxxxL
L2TEDHCOxxxxxxL
L2THHxxxxxxR
Installation For Similar Products
STEP 1: Unpack and inspect individual pieces for damages or missing hardware.
STEP 2: Pick a clean unobstructed area to assemble desk. This unit is best to as-
semble upside down.
STEP 3: Orient Gable with Pre-drilled Holes facing underside of the desk assembly.
a. Install levellers into T Nut inserts on the bottom of the gable.
b. Install Blum Connector screws into pre-drilled holes on the top edge of
the gable.
c. Based on the application, see drawing for positioning, install Modular
connector screws in the top two pre-drilled hole positions.
STEP 4: Half modesty. The half modesty will have modular connectors pre-installed
on each end.
a. Connect half modesty to the full gable by lining up modular connectors
with modular screws and slide half gable down, you can use a mallet to
securely seat the half gable into position.
b. Install 2 shoulder screws into pre-drilled holes on the side on the monoleg.
Connect half modesty to the monoleg by lining up modular connectors with
modular screws and slide half modesty down, you can use a mallet to
securely seat the half gable into position.
c. Screw monoleg to the worksurface using #8x3/4 wood screws provided
STEP 5: Turn Assembly upright.
STEP 6: This product is intended to be ganged to adjoin surface. Using fl at
brackets, secure with #8x3/4 wood screws to attach underside of surface to join
assemblies.
Leveler
L007250037 “T” Nut Insert
L007250039 Blum Connector
Screw L005650060 Flat Bracket
L005650025
Modular Connector
(installed) L004250001
WORKSURFACE
HALF MODESTY
MONOLEG
L2BHML03 (default)
or
L2LSQ3X3
GABLE
Wood Screw #8 3/4
L007250032