211026v1
Thumb Throttle/Pedal Assistance Level Options
The assist level of the E-bike drive can be changed anytime, even during riding. The assist
level ranges from 0 to 5. The default is “1” when the display is started. Level 1 is the
minimum output power; level 5 is the maximum. Press the +/- button on the remote to
increase/decrease the levels and change the motor output power.
Thumb Throttle:
In power setting “0”, the thumb throttle is activated and the rider has power on
demand by depressing the thumb throttle, including from a complete stop. In this power setting, the
pedal assist is deactivated. The motor stops when the throttle is released or a brake lever is squeezed.
Pedal Assistance
:
In power settings “1
-
5”, the thumb throttle is deactiv
ated and the motor can only be
engaged by pedal assistance.
When using pedal assist, an electric motor supplements the rider’s own
effort. To use the pedal assist, simply start pedaling, tap the +/- arrows to increase or decrease the
amount of pedal assist. Pedal assist will engage at speeds up to 20 mph.
In pedal assist, the motor stops when you stop pedaling or squeeze a brake lever.
Battery Indicator
The five battery bars
represent the capacity of
the battery. Each bar is
equivalent to a capacity of
approximately 20% When
the battery is in low voltage,
the battery frame will flash to give a notice that the battery needs to be recharged immediately.
Best Practices for Extending Range and Battery Life:
• Whenever possible, avoid applying full throttle when the bike has slowed to very low speeds, has
stalled, or stopped.
• Pedal to assist the motor when climbing hills and accelerating from a stop.
• Reduce your power consumption whenever possible.
• Do not climb hills steeper than 15% in grade.
• Avoid sudden starts and stops.
• Accelerate slowly.
Motor Power Indicator
The power of the motor can be read on the interface. This illustration shows the power at
level 3
.
Summary of Contents for 510 B1
Page 31: ...211026v1...
