211026v1
LCD DISPLAY INFORMATION AND OPERATION
Please note, the LCD Display has been programmed to meet Glion’s Electric Bike operating
specifications. Reprograming the LCD Screen could result in product malfunction and damage. Please
contact
or visit
with any questions or concerns about your
Glion LCD Display.
DISPLAY AND FUNCTIONS
GENERAL OPERATION
On/Off
Hold the On/Off button on the remote for 1 second to turn on. Hold the On/Off button for 2 seconds to
turn off. When the E-bike is parked for approx. 10 minutes, the E-bike system switches off automatically.
Switching Push-assistance Mode On/Off
To activate the push-
assistance function, press and hold the “
-
“ button on the remote. After
2 seconds, the E-bike is activated to go at a uniform speed of approximately 3.5 mph (6
Km/h) while the screen shows
The push-assistance function is switched off as soon
as you release the button
.
WARNING:
Push assistance mode should only be used while dismounted from the bike and
with both hands on the handlebar. Always keep at least one hand on a brake lever to allow
quick cutoff of the motor assistance if necessary and to maintain control of the bike
.
Switching Lighting On/Off
To switch on E-bike headlamp and the display backlight, briefly press the
button on the
remote. Press the
button again to switch off the headlamp. The display backlight
brightness is automatically reduced while the screen displays
while lighting is turned on.
Minus “-“
button
Plus “+”
button
Summary of Contents for 510 B1
Page 31: ...211026v1...
