211026v1
Step 7 Inflate Tires
Check that the tire beads and tires are evenly seated around the rims. Use a pump with a Schrader
valve and pressure gauge to inflate each tire to the recommended pressure indicated on the tire
sidewall. Do not over/under inflate the tires.
Step 8 Review the Remainder of this Manual and Watch All Instructional Videos at www.getglion.com
If you assembled the bicycle yourself, Glion highly recommends you have a certified, reputable bicycle
mechanic inspect the assembled bicycle before your first ride.
Once the bike has been assembled following the instructions above, read, understand, and follow the
procedures outlined in the remainder of the manual before operating the bike.
NOTICE: If you have any questions regarding the assembly of your bike, please contact Glion. If you are
unsure whether you assembled your bicycle correctly, please, for your safety and the safety of others,
have a certified, reputable bicycle mechanic inspect the assembled bicycle before your first ride.
NOTICE: Ensure that all hardware is tightened properly following recommended torque values. Also
ensure that all safety checks in the following sections are performed before the first use of the bike.
WARNING:
Do not extend any components including the handlebar, seat post, or seat
saddle beyond any minimum insertion marking etched into the components. Ensure that
all hardware is properly tightened (to the values in the Recommended Torque Values
table) and components are secured before moving on to the next step, otherwise, bike
damage, serious injury, or even death could occur.
RIDER’S COMFORT
Generally, for the most comfortable riding position and the best pedaling efficiency, the seat height
should be set in relation to the rider’s leg length, as described in the “
Adjusting the Seat Height
”
section,
allowing the knees to be slightly bent with the ball of the foot still on the pedal when the pedal is at the
lowest point at the bottom of each stroke.
NOTICE:
Depending on a rider’s preference, ability, and amount of experience
with bikes and
E-bikes, lowering the seat so the rider can put one or both feet on the ground without
dismounting from the seat might offer a safer seat height to learn how to operate and
balance the E-bike. Otherwise, you will have to dismount from the seat to straddle the bike with both
feet on the ground.
To obtain the maximum comfort, riders should not overextend their arms’ reach when riding. It is
typically advised to ensure that the handlebar and brake lever angles allow a comfortable arm position
and relatively straight line from forearms, wrists, and hands. Ensure that the handlebar angle is adjusted
so that the handlebar does not contact the rider’s body while turning. A bike fitting professional, such as
a certified bike mechanic who specializes in bike fitting, should be consulted to ensure you have a good
fit.
WARNING:
If you have any questions regarding the proper fit of your bike, please consult a
certified local bike mechanic for assistance.
Summary of Contents for 510 B1
Page 31: ...211026v1...
