GlideTrak Assembly & Set Up
10
22. Once the Wire Loop is inserted into
the Wire Slot on the back of the
Seat Pad, the back of the Wire Loop
will sit directly over the Seat Screw
Holes.
Replace the Seat Screws back
into the Seat Screw Holes
CAUTION:
Do not press down on the
screws as the threads inside the hole
may sink into the seat permanently.
Place a Seat Screw through a
Washer.
Place the Screws and Washer on
top of the Wire Loop and into the
Screw Hole.
(Photo 12 & 13
) Turn
the Screw clockwise to engage the
Seat Screw in the Seat Screw Holes.
Back of Wire
Loops Over
Seat Screw
Holes
Washer
Screw
Photo 12
Seat Pad (back view)
Back of Wire Loops
over Seat Screw
Washer
Screw
Seat Pad
Photo 13
Re-attaching the Seat to the Seat Assembly
The order is: Screw, Washer, Wire Loop, then Seat
23.
Orient yourself with
the Seat Assembly,
noting the front, back,
up and down for the
Seat and Straps.
Note that Seat Pad is
up and towards the
back and the Hip Pad
will face up and
forward as in
Photos
8 & 9
.
You are now ready
for Seat Assembly
placement
and
setting yourself up
on the GlideTrak.
